Used Mini-Excavator Attachments and Construction Equipment

1433 produits disponibles

When it comes to used mini-excavator attachments, the error rarely lies in the tool itself. It’s usually in its mounting: just two millimeters off in pin diameter, a wider arm than expected, and the bucket won’t fit. Codimatra dismantles original equipment from selected mini-excavators, excavators, and loaders, inspects them in its workshop in Castelculier, near Agen, and categorizes them by machine. Choose your equipment family below or entrust the search to one of our advisors.

How to Choose the Right Used Mini-Excavator Attachment

Three measurements determine compatibility: the pin diameter, the distance between pins, and the width of the arm. Even a slight difference in pin diameter prevents fitting. Take these measurements from your machine before comparing listings, and note the attachment system used. For hydraulic tools, also check that the mini-excavator has the appropriate auxiliary line, either single or double-acting. Every piece of equipment is inspected before sale: weld condition, wear on blades and teeth, and play in the bushings. With this information and your machine’s reference, our advisors help you find equipment that fits without modification.

Used Buckets for Mini-Excavators and Excavators

Used Trapezoid Bucket

The trapezoid bucket creates the exact profile of ditches and swales. You can find it in our range of used buckets, specifying the sidewall angle and bottom width. As with cleaning or trenching buckets, check that its pins match your attachment. An adjustable tilt cleaning bucket for excavators requires an additional hydraulic line for tilt control.

Hydraulic Excavator Attachments: Quick Couplers, Arms, and Linkages

On a hydraulic excavator, equipment extends beyond the tool. The boom, stick, and linkages define the machine’s reach and configuration. A used one-piece boom can replace a rarely used offset boom; a longer stick can adapt an excavator for handling tasks. Pivot pins are often replaced simultaneously.

Used Mini-Excavator Quick Couplers

For excavators equipped with mechanical or hydraulic quick couplers, the quick coupler lets you switch buckets or tools in minutes. It must match the pins on the stick side of the machine and the attachment system of your existing tools. A hydraulic quick coupler requires a dedicated hydraulic line on the machine; a mechanical coupler locks manually, with a slightly longer tool change time.

Equipment for Loaders, Bulldozers, and Graders

Bobcat and Compact Loader Accessories

Equipment removed from compact loaders and Bobcat mini-excavators falls under the same categories: arms, linkages, buckets. Please specify the exact machine model, as dimensions vary between series.

Expert Assistance to Find the Right Equipment

Don’t see your attachment listed? Provide the brand, model, and serial number of your machine along with the measured dimensions. If the equipment comes from a different machine, our advisors will tell you which measurements to check before purchasing. They search through approximately 17,000 references and are available at 05 18 23 21 34. Codimatra has been supporting earthwork professionals for over 40 years.

Engine, hydraulic, cabin, or undercarriage parts are grouped by machine in our used mini-excavator tracked parts. Select the brand and model to view available parts, or call an advisor with your serial number.

The lifespan mainly depends on operating hours, maintenance, and job type. Attachments wear out before the machine: bucket teeth and cutting edge, pivot pins and bushings, stabilizer pads. Replacing these with inspected used parts extends the mini-excavator’s service life without the cost of new equipment.

Can't find the part you're looking for?

Ask us !

* Required fields