Used Excavator and Construction Machinery Toolbox

Toolbox and Battery Box on an Excavator

On an excavator or loader, the toolbox is integrated into the machine. Depending on the model, it stores onboard tools, grease pumps, and documents, or houses batteries and the fuse box. This built-in jobsite toolbox travels with the machine from site to site: there’s no need to unload a separate box each evening.

Its security is as important as its storage capacity. An original lock, intact hinges, and solid sheet metal make break-ins more difficult and enhance security for unattended worksites.

Used Toolboxes for Caterpillar, Volvo, Liebherr and More

• Caterpillar: excavators 314C, 323F, 336E, and 345C, loaders 918M and 966K
• Volvo: loaders L110F and L120E, excavators ECR235D, EWR150E, and EC380E
• Liebherr: excavators A314, A902, R924, R934C, and R956, loader LR622
• Mecalac 714MW and 12MTX, Hitachi ZX140W-5 and ZX250LC-3, Case WX145
• Komatsu PC228US-11, New Holland E135B, JCB JS330

Between Cab and Hood: Locating the Toolbox

On an excavator, the toolbox is often located between the cab and the hood, on the turret side. On a loader, it’s usually mounted on the rear chassis or above a fender. Note the external dimensions, the spacing of the mountings, and the direction the lid opens: a lid opening toward the cab has different hinges than one opening outward. The model, serial number, and a photo of the location are enough for us to identify the part.

What’s Stored in an Excavator Toolbox

• Onboard tools: keys, grease pump, rags, gloves
• Machine documents and maintenance logbook
• Batteries, in a ventilated compartment sealed with a gasket
• Small wear parts: bucket teeth, pins, cotter pins

Lock, Seal, Hinges: Our Checks

Before sale, each toolbox is opened and closed multiple times: the lid must be flat and close firmly. The workshop verifies that the lock works, with or without keys depending on the part, that the rubber seal on battery boxes is present for a watertight closure, and that mounting brackets show no cracks or penetrating corrosion.

Get a Toolbox Suited to Your Excavator

• Brand, model, and serial number of your machine
• Photo of the toolbox location and its mountings
• Toolbox function: tools or batteries

Our advisors compare your information with our approximately 17,000 references and respond to you at 05 18 23 21 34. Parts ship all over France. To secure other access points on your machine, see compartment doors and our full range of used construction body parts.