Used Kubota Spare Parts

214 available products

A leaking cylinder on a KX080-4, a worn sprocket on a U36-4: when a Kubota mini excavator breaks down, the entire site waits for the part. Codimatra sells used Kubota parts dismantled from carefully selected machines, then inspected and tested in our workshop in Castelculier, near Agen. Filter the list below by part family or machine model. If the reference is not listed, our advisors will search for it using the serial number.

Used Kubota Mini Excavator Parts, KX and U Series

Kubota mini excavators from the KX and U series are among the most common on construction sites in France, making their used Kubota parts highly sought after. Our stock covers both micro and midi excavators of the brand, from the Kubota U36-4 to the Kubota KX080-4. Watch out for generations: on the same machine model, a part may differ between version -3 and version -4. That’s why each used part is linked to its machine model in our catalog.

Kubota Mini Excavator Spare Parts Catalog

Original, Compatible, or Used Parts: Which to Choose?

For your Kubota replacement parts, two options are contrasted: buying new or reusing an original part. Brand new original parts sold through the manufacturer’s network suit recent machines. Compatible parts, made by third parties, cost less but their quality and dimensions can vary between manufacturers. Used parts are original Kubota components, factory-fitted, then dismantled and inspected. For mini excavators with several thousand hours, this is often the most cost-effective option given equivalent fit. It also avoids some fitting adjustments sometimes needed with compatibles.

Kubota France Dealership: The Alternative in Spare Parts

  • The Kubota network: your point of contact for new machines and brand new original parts. Codimatra is not an official Kubota dealer.
  • Codimatra used parts: original parts already in service, dismantled, cleaned, then tested in our workshop.
  • Older machines: for older Kubota mini excavators like the KX61-3 or U25, used parts often allow you to find body parts or hydraulic cylinders that have become rare new.
  • All over France: shipping from Castelculier to your workshop or job site.

Kubota Exploded View: Finding the Correct Reference

Before calling, open the Kubota exploded view for your model in the machine’s parts manual. It shows the part within the assembly and gives its manufacturer’s reference. Note this reference, the machine model, and the serial number on the chassis plate. With these three details, our advisors check compatibility with our stock of used Kubota parts, even when a reference has been replaced over successive generations.

Kubota Mini Excavator Dismantling and Inspection

  • Selection: Kubota mini excavators chosen based on model and condition of components: engine, hydraulics, transmission.
  • Dismantling: careful removal of each part, followed by cleaning.
  • Inspection: workshop testing before stocking.
  • Cataloging: each used part linked to its original machine model, reducing fitting errors.
  • Compared to online listings: an identified, inspected part and an advisor verifying compatibility before shipment.

Used Kubota Engines, Sold As-Is

Kubota diesel engines power their mini excavators but also many compact machines by other manufacturers. Codimatra offers used combustion engines dismantled from selected machines and sold as-is. The model, origin, and comments from dismantling are shared before purchase. For peripherals, also see our used starters. Radiators and water pumps are available depending on supply: ask our advisors.

Ordering Your Used Kubota Parts

  • Prepare the machine model, serial number, and if possible, a photo of the part.
  • Call our advisors at 05 18 23 21 34 to confirm compatibility.
  • Receive your quote with availability of the part.
  • Have it delivered anywhere in France, to your site or workshop.

Managing a Fleet with Other Brands?

Codimatra also offers used parts for Yanmar , Takeuchi , and Bobcat mini excavators, as well as for Volvo machines. The same workshop inspections apply, whatever the brand.

No. Dealers sell brand new original parts. For a Kubota mini excavator with several years of service, a used part inspected in the workshop is an economical alternative. It’s an original part removed from a machine of the same model, avoiding the dimensional discrepancies sometimes found with compatible parts.

Note the exact model and serial number on the machine’s plate, then locate the part on the exploded view in the parts manual. Provide these details to our advisors at 05 18 23 21 34, along with a photo if possible. They verify the matching reference in stock.

Yes. Each part is dismantled from a selected machine, cleaned, then inspected and tested in our Castelculier workshop before stocking. Diesel engines are an exception: they are sold as-is, with notes from dismantling.