Used arm lift cylinder

What is the role of an arm lift cylinder?

Lifting cylinders are used on bell cranks on crawler loaders, wheel loaders or backhoe loaders. They allow the operator to move the arm lift from up and down. This operation allows the bucket to be raised / lowered. Whether handling dirt, stones, pallets, snow ... the bell crank must be the right size to be used with the loader. The shorter it is, the more it will be able to accommodate a large load while the opposite will only allow light handling. Unsuitable use can weaken the lift arm and damage the lifting cylinder in the medium term.

When to change your shaft lift cylinder?

The lift cylinders of the lift arm are subjected to great stresses. The most frequent causes of failure are: oil leakage or deformation of the cylinder rod. It can be caused by excessive loads or by foreign bodies that come into contact with the seals. Despite the antiparticle joints, which expand as the years go by, the accumulation of dust in the drums is inevitable. This accumulation of foreign matter in the cylinder will severely damage it and cause leaks, scratches on the drum, or even hydraulic pump pollution.

Our list of shaft lift cylinders is updated daily so that you can find the product that perfectly matches your machine.

CODIMATRA offers a wide range of brands and models such as: Caterpillar, Doosan, Liebherr, Fiat Allis, Furukawa, Hyundai, JCB, Mecalac, Poclain, Volvo etc.

To help you choose the model of lifting cylinder you need, call on the expertise and professionalism of CODIMATRA's teams. We are at your disposal to answer all of your questions or for any additional information.