Used Axle Locking Cylinder for Wheeled Excavators

110 produits disponibles

An axle locking cylinder that leaks or no longer holds its position immobilizes a wheeled excavator: the machine must neither drive nor work in this condition. Codimatra dismantles and tests its used axle locking cylinders in the workshop for brands Case, Liebherr, JCB, Volvo, Komatsu, Mecalac and Poclain. The list below shows the available references, with their brand and model. To confirm compatibility with your machine, call an advisor at 05 18 23 21 34.

What is the purpose of the axle locking cylinder?

On a wheeled excavator, the axle oscillates to adapt to uneven terrain while moving. The axle locking cylinder immobilizes this oscillation during work, stabilizing the machine. It is therefore heavily used and its failure is noticeable quickly: hydraulic oil leak, axle no longer stays locked, unwanted movement. Replacing the cylinder with a checked used part prevents long downtime of the front or rear axle. Discover all our parts for wheeled excavators.

Locking cylinders by excavator brand

  • Case, JCB, and Komatsu: standard-sized wheeled excavators, searchable by model in the list.
  • Liebherr and Volvo: larger wheeled excavators and loaders.
  • Mecalac and Poclain: wheeled excavators from less common manufacturers, where manufacturer reference is particularly important.
  • New Holland: axle locking cylinders available for this brand.

Used double-acting hydraulic cylinder: dimensions

Many machinery cylinders are double-acting: oil feeds both sides of the piston, allowing it to push and pull. To select the right model, note the manufacturer reference, stroke, center-to-center distance, and type of mounting. Also record the exact machine model and axle position, front or rear. This information helps an advisor confirm compatibility without errors.

Defects to check before installation

  • Hydraulic oil leaks around the rod or fittings.
  • A rod free of scratches or pitting, which would damage the seals.
  • Seals in good condition, or a new seal kit provided for reassembly.
  • A clean hydraulic system, without contaminated fluid or deformed fittings.

From a specialist who tests the parts before sale. Codimatra offers used hydraulic cylinders for construction machinery, dismantled and tested in the workshop in Castelculier. Please specify the brand, model, and reference of your machine so that the advisor can identify the correct part.

It varies depending on the size of the cylinder, the brand, and the condition of the part. A used part costs less than a new cylinder, but there is no fixed price. The price of each reference is listed on its datasheet or provided on request at 05 18 23 21 34.

Its lifespan depends on usage, oil cleanliness, and the condition of the rod and seals. A well-maintained cylinder lasts a long time, while a scratched rod rapidly wears out its seals. No single figure applies to all machines: verify the rod and sealing before purchase.

Can't find the part you're looking for?

Ask us !

* Required fields