Question 1

Can a Volvo loader wheel shaft be fitted on a dump truck?

Accepted Answer

No. The shafts for L-series loaders and A-series dump trucks differ in length and spline count. Even within a family, shafts for L150E and L150G vary. Provide us with the part reference or, failing that, the full designation and machine serial number: we verify compatibility before shipping.

Question 2

What is the wheel axle called?

Accepted Answer

On a machine, the axle driving the wheel is called the wheel shaft or half-shaft, since each side of the axle has its own. The fixed part around which the hub rotates is named differently: spindle for a steering axle, trumpet for a rigid axle. The axle term refers to the whole assembly with both wheels.

Question 3

What is the definition of a half-shaft?

Accepted Answer

A half-shaft links one side of the differential to its corresponding wheel. It’s called a half-shaft because an axle has two, left and right. On Volvo loaders and dump trucks, it drives the planetary gear reducer housed in the hub.

Question 4

What is the price of a driveshaft?

Accepted Answer

Four factors determine it: the original machine, length, position on the line, and condition of splines or cross bearings. At comparable condition, a used original part generally costs less than new. Send us the reference or model of your Volvo machine for a quote.

Question 5

How is a driveshaft balanced?

Accepted Answer

Balancing is done on a specialized bench: the shaft spins at operating speed, sensors detect imbalance, then the workshop adds or removes small weights until vibrations stop. This requires a transmission specialist. For used original shafts, keep existing weights and align the yoke mark during reassembly.

Question 6

What is the difference between a driveshaft and a universal joint?

Accepted Answer

The universal joint is the articulated joint with cross bearings that allows rotation despite an angle between two shafts. The driveshaft refers to the entire assembly: a tube, a slide, and a universal joint at each end. Commonly, the whole is called "driveshaft". On Volvo EW excavators, the front wheel shaft also includes such a joint.

Question 7

Is a Volvo truck wheel shaft or driveshaft suitable for a construction machine?

Accepted Answer

No. Volvo FH or FM trucks and Volvo construction machines use different axles and drive lines, sized for different loads and speeds. For a Volvo loader, dump truck, or excavator, only a part from a construction machine with the same reference will fit.

Used Volvo Construction Wheel Shaft - page 3

161 produits disponibles

Wheel shaft for VOLVO A35C

Wheel shaft for VOLVO A35C

Wheel shaft for VOLVO A35D

Wheel shaft for VOLVO A35D

Wheel shaft for VOLVO A35D

Wheel shaft for VOLVO A35D

Wheel shaft for VOLVO A35D

Wheel shaft for VOLVO A35G

Wheel shaft for VOLVO A35G

Wheel shaft for VOLVO A35G

Wheel shaft for VOLVO A35G

Wheel shaft for VOLVO A35G

Wheel shaft for VOLVO A35G

Wheel shaft for VOLVO A40D

Wheel shaft for VOLVO A40D

Wheel shaft for VOLVO A40D

Wheel shaft for VOLVO A40D

Wheel shaft for VOLVO BL71

Wheel shaft for VOLVO BL71

Wheel shaft for VOLVO BL71

Wheel shaft for VOLVO BL71

Wheel shaft for VOLVO BL71

Wheel shaft for VOLVO EW140B

Wheel shaft for VOLVO EW140B

Wheel shaft for VOLVO EW160C

Wheel shaft for VOLVO EWR150E

Wheel shaft for VOLVO EWR150E

Wheel shaft for VOLVO L110E

Wheel shaft for VOLVO L110F

Wheel shaft for VOLVO L110F

Wheel shaft for VOLVO L110F

Wheel shaft for VOLVO L110F

Wheel shaft for VOLVO L110F

Wheel shaft for VOLVO L110F

Wheel shaft for VOLVO L120E

Wheel shaft for VOLVO L120E