M316C Caterpillar excavator

 

CODIMATRA receives today a renowned excavator : The M316C Caterpillar. This 16-ton machine is equipped with a ripper tooth, and formerly worked in a limestone quarry.
Our M316C Caterpillar excavator will soon be dismantled by us. After a thorough cleaning, his organs will be tested and reconditioned as necessary, in our workshops.

M316C a excavator that has it all

With its compact size, this Caterpillar excavator appreciate small spaces. This model with a particular short orientation radius allows access to areas where a 16 tons classical excavator would not pass. However, its small size contains a 3056E ATAAC 6-cylinder engine, delivering 145 horsepower. A power adapted to its radius of action, but not skipping over the current emission regulations.

This hydraulic excavator offers great stability thanks to its wide dozer blade. It has two front outriggers and a rear blade to a higher breakout force. In addition, the two stabilizers can be controlled individually in order to ensure optimum stabilization in sloped according to the shape of the ground. The blade, although designed for the discharge of loosened material, also serves to stabilize the machine and limit the pressure on the ground (it can be assembled at the front or rear of the machine).

The hydraulic system of our Caterpillar M316C required a lot of Caterpillar engineers to reduce hose lengths and organ size. That is for the entire circuit fits into the upper frame of the machine. Thanks to a main hydraulic pump “load sensing” with high capacity, it allows fast cycle times to achieve maximum productivity and optimal profitability.

Our M316C just went out mines

At first, our M316C worked in a limestone quarry where it substitute blasting for the owner. It is less expensive and more environmentally responsible. Strong of specific equipment, it will perfectly suited for rock excavation within narrow limestone mines.

Equipped with custom-designed special equipment made to its former owner:
- A ROPS / FOPS cab allowing a safe work for the operator.
- A hydraulically tilting cab
- A narrow and a special balance, creates custom by the CMM  Company.
- A pickling tooth to come dislodge rocks.
- A large capacity cab filter.

Working underground, the M316C Caterpillar has a comfortable driving position and a cabin with limiting blind spots, allowing work in a tunnel.

A second life for our M316C excavator

Recently joining Codimatra, our excavator goes down safely to her door-tank. Our technicians will give new life to all these organs and will rehabilitate failing organs on ours M316C Caterpillar.

Yesterday, our M316C excavator met the owner in his quarry; today dismantled, its organs reconditioned will rehabilitate to work your Caterpillar.
Find many brands and models in CODIMATRA: Case, Caterpillar, Fiat, Hitachi, Hyundai, JCB, Komatsu, Liebherr, New Holland, Samsung, Volvo, Yanmar etc. If you hesitate on the part model you need, our technical sales team CODIMATRA has the necessary expertise to guide you on the piece that perfectly suit your machine. Contact them by phone 05 53 98 55 78. If, however, you already know the part you need and want to know its pricing, you can request a quote online.
You can find out now the entire Caterpillar spare parts stock and other brands on the "spare parts" page of our website.